DORMA-Glas on 92 pages. What makes us special, what is important to us and what are your advantages have been clearly presented in a document. Feel free to take a look.
The demand for fascinating, light-flooded architecture requires elegant, design-oriented solutions made of fittings and glass. We offer an extensive range of high-quality glass fittings to meet this demand. Technically sophisticated, visually attractive and with a wide range of combinations, toughened glass assemblies can be realised individually and modularly.
Whether a continuous glass front in alignment or an angled design is required, the UNIVERSAL range offers the right fitting. Double-action and single-action doors can be integrated into toughened glass assemblies with or without overhead panels. Single doors with direct connection to the floor and ceiling or integrated into a post and beam structure are also possible. UNIVERSAL - as the name suggests.
UNIVERSAL Motion - The extra on a door with corner fittings. The fitting is compact in design and powerful in function. Thanks to its hydraulic function, it closes even heavy doors with ease. Visually, it matches the standard UNIVERSAL fittings and thus equips doors in toughened glass assemblies with included convenience: Door closing without additional top door closer or floor spring.
Secure single-action doors with patented system: In the case of BEYOND, the pivot point is extra close to the glass edge. The short rod solution conveys a special visual ease. Thanks to the constant minimum gap during the rotational movement in the uninterrupted pivot rod version, the risk of trapped fingers can almost be ruled out.
The pivot point outside the glass plane allows single-action doors with EA corner fittings to open up to 180°. They then stand directly against the aligned wall and not in the way. The fittings themselves are similar in shape and dimensions to the UNIVERSAL corner fittings. This makes them a suitable alternative for single doors with this special opening requirement if UNIVERSAL fittings are used in adjacent areas.
The lock programme for toughened glass assemblies offers the right locks for different requirements: Corner locks to match the UNIVERSAL range, centre locks - among others in the OFFICE Junior design - and slide-on locks that can even be retrofitted without glass processing.
MANET impresses with its distinctive design: a point-fixed system in stainless steel. This elegant solution emphasizes the generosity of a transparent architecture and relies on a high level of flexibility. Besides doors and the standard toughened glass assemblies, this allows you to realize special formats for a very special architecture.
The profiles, which are available in stainless steel and aluminium with various surfaces, provide a clean, elegant connections of toughened glass assemblies toward the wall, the ceiling or the floor. The load-bearing profiles ensure that the side or overpanels are securely held.
The delicate and elegant MR 22 and MR 28 profile systems form a circumferential frame for toughened glass assemblies mounted to the wall, ceiling and floor. With a visible profile width of only 22 or 28 mm, nothing is taken away from the effect of the glass surfaces.
The TP/TA EASY Safe door rails ensure a high level of stability for particularly wide or highly frequented doors when used simultaneously at the top and bottom edges of the door. At the bottom, they serve - as an alternative to corner fittings - to protect against impacts. Thanks to the design and surfaces matched to the corner fittings, they are therefore the visually harmonious and at the same time safe addition to complex toughened glass assemblies.